TYAN FT48B-B7100, Service Engineer'S Manual

Page: 5 / 86

5
http://www.tyan.com
About this Manual
This manual is intended for trained service technician/personnel with hardware
knowledge of computers. Front bezel key should be controlled by trained service
technician/personnel. Components inside the compartments should be serviced only
by a trained service technician/personnel. This manual is aimed to provide you with
instructions on installing your TYAN FT48B-B7100.
How this guide is organized
This guide contains the following parts:
Chapter 1: Overview
This chapter provides an introduction to the TYAN FT48B-B7100 barebones and
standard parts list, describes the external components, gives an overview of the
product from different angles.
Chapter 2: Setting Up
This chapter covers procedures on installing the processors, memory modules, hard
drivers and other optional parts.
Chapter 3: Replacing the Pre-installed Components
This chapter covers the removal and replacement procedures for pre-installed
components.
Appendix:
This chapter provides the cable connection table, the FRU parts list for reference of
system setup, and technical support in case a problem arises with your system.