Twose TP5750, Operation Manual

Page: 15 / 54

6
are fully conversant with all aspects regarding the safe minimum distances that apply
when working with machines in close proximity to Power Lines. (Further information
on this subject can be obtained from the Health & Safety Executive or your Local
Power Company).

Always disengage the machine, kill the tractor engine, remove and pocket the key
before dismounting for any reason.

Always clear up all debris left at the work area, it may cause hazard to others.

Always ensure when you remove your machine from the tractor that it is left in a safe
and stable position using the stands and props provided and secured if necessary.
WHEN NOT TO USE THIS MACHINE:

Never attempt to use this machine if you have not been trained to do so.

Never uses a machine until you have read and understood the operator handbook, are
familiar with, and practiced the controls.

Never use a machine that is poorly maintained.

Never use a machine if guards are missing or damaged.

Never use a machine on which the hydraulic system shows signs of wear or damage.

Never fit, or use, a machine on a tractor that does not meet the manufacturer’s
minimum specification level.

Never use a machine fitted to a tractor that does not have suitable front, rear and
side(s) cab guarding made of metal mesh or polycarbonate.

Never use the machine if the tractor cab guarding is damaged, deteriorating or badly
fitted.

Never turn a machine cutting head to an angle that causes debris to be ejected towards
the cab.

Never start or continue to work a machine if people are nearby or approaching - Stop
and wait until they are at a safe distance before continuing.

Never attempt to use a machine on materials in excess of its capability.

Never use a machine to perform a task it has not been designed to do.