INSTALLATION · HARNESS AND WINDSHIELD LOCK
7
Now, connect the wiring harness to the battery under the
seat. The orange cable, goes to the positive terminal,(u)
then the black cable goes to the negative terminal(v).
Reattach the windshield —
with the audio system to the bike (w).
Take the two-pin power plug on the audio wiring
harness and connect to the socket on the bottom
of the audio system(x).
Flip the switch on the front of the radio to power
it up(y).
Push the windshield into place on the bike.
If you purchased the optional windshield locking
brackets, now’s the time to install them. Position the
lock bracket on the inside of the windshield frame,
aligning the hole with the hole on the
STAGE FOUR: INSTALL WINDSHIELD & WINDSHIELD LOCK
windshield frame (z) and the hook over the bike
frame as you see here. Insert the lock screw (zz)
and tighten with the Torx driver. Repeat on the
other side. Now the windshield cannot be
removed without removing the screws.
Reinstall the seat and you are done.
u
v
w
x
x
y
zz
z
LOCK SCREW
HOOKS OVER
BIKE FRAME
ALIGN
THE HOLE
