6
EN
• Do not store or use this appliance outdoors, near
water or in a wet environment.
• Always pull the plug out of the socket before
cleaning the appliance.
• To avoid overheating, the device should not be
kept in continuous operation for more than 15
minutes.
• The appliance is provided with a safety lock but-
ton on the motor unit (1) that does not allow the
appliance to start if the hopper (8) and the sepa-
rator (4) are not positioned correctly.
• It is not necessary to push too hard on the pieces
as you assemble the appliance. Follow the steps-
described in the following section. Everything
should be getting along easily. Respecting this
would prevent problems such as tears or da-
mages of the pieces.
ASSEMBLING AND OPERATING INSTRUCTIONS
5. Place the basket (6) into the basket
support (5) then place all them in the
separator (4). (Figure 4)
6. Check that the red symbol on the
basket (6) needs to align with the red
symbol on the separator (4). Ensure
that the basket (6) is completely pu-
shed down. (Figure 5)
1. Rinse and dry the parts before using
them again.
4. Place the juicing bowl (4) on top
of the motor base (1). Press down
the separator (4) and rotate in a clo-
ck-wise direction, then lock it into po-
sition. (Figure 3)
2. Place the motor base on a flat, dry
and stable surface. (Figure 1)
3. Underneath the juice bowl (4) is
the pulp silicon (13). Ensure that the
silicon (13) is firmly inserted into the
whole. (Figure 2)
Figure 1
Figure 4
Figure 5
Figure 3
Figure 2