18
The mapping is ongoing,
keep the camera steady and
do not close the app during
this process.
Looking at the tree:
/ / RED/ORANGE/YELLOW
LEDs are still to be mapped,
scan another view pointing
at them.
GREEN LEDs are ok,
already mapped
To keep mapping press
ADD ANOTHER
and repeat from step 3.13
until all the LEDs are green to
ensure the best layout, when
done press
I’M SATISFIED
Frame your installation
and press
MAPPING
* Once you start mapping, LEDs
turn different RGB colors during
the process
START MAPPING
3.14
3.13
3.15
3.16
Do you want to add another point
of view to the mapping?
I’M SATISFIED
ADD ANOTHER
STEP 3
Re-configuring the Cone Tree
TROUBLESHOOTING