TO INSTALL THE ROTISSERIE:
Note: The warming rack must be removed prior to rotisserie installation.
* There are two placement options for the rotisserie; the Rear Position is for normal to smaller loads and the
Front Position is for larger loads.
For Larger Loads:
1.
Install the rotis motor horizontally as shown. The motor socket hole will line up with the front notch of
the spit saddles.
2.
Insert the rotis-rod into the motor socket hole and place the rod on the front notch of each spit saddle.
3.
Remove grill grates.
4.
Place a basting pan on top of the radiants to catch the drippings. The radiants may also be removed for
much larger loads.
For Smaller Loads:
1.
Install the rotis motor horizontally as shown. The motor socket hole will line up with the rear notch of the
spit saddles.
2.
Insert the rotis-rod into the motor socket hole and place the rod on the rear notch of each spit saddle.
3.
Place a basting pan on top of the stainless steel grates to catch the drippings.
Note: The rotisserie motor requires 120 volt supply. The power supply cord on the motor is
equipped with a 3-prong (grounded) plug for protection against shock hazard. Do not cut or
remove the grounding prong from the plug.
14
