Enclosure 1 – How to mount the chain for stirrer and stirrer wings
The stirrer wings included ( both long and
short versions) are mounted as shown on
picture. The long model must be fit on the rear
side of stirrer plate – towards the chain
(The wings might break, if placed wrong way)
Stirrer wing-
long model
Stirrer wing-
short model
The chain tightener should not be loosened, as it
wrings in the rubber fixation
The chain is easiest fitted, if somebody can help you
holding the chain tightener .
Do remember to cut the power – Cut power at Main
Switch!!
1)
Place the wrench, a big thong or the like at “arm
of the chain tightener and press against the cog-wheel
as shown.
2)
When holding the chain tightener, you are now able
to mount the chain by means of the chain connection
included (shown by the arrow)
3)
When the chain connection is fit, you loose the tong
or wrench again
4)
The chain must run as shown in this picture.
Check after having finished the work, that the chain
runs freely.
Enclosure 1 – Oct. 2002
