Twilight DT4200, Instruction Manual

Page: 50 / 80

44
Retaining the Measured Value
Automatically retaining the measured value
when the value stablizes (AUTO HOLD)
(DT4223, DT4224)
Press for at least 1 sec.
Blinks
(Waiting for
measured value to
stabilize)
Measured value stabilizes
Lights up
Lights up
(Waiting for measured
value to stabilize)
Re-connection
(Hold measurement value)
Press for at least 1 sec.
( [HOLD] blinks, the instrument is
waiting for the measured value to
stabilize.)
When the measured value stabilizes,
a beeping sound is generated and
the value is retained.
( [HOLD] lights up.)
When the test leads are moved
away from the measurement object,
reconnected again, and the measured
value stabilizes, a beeping sound is
generated and the new measured
value is retained.
When is pressed while
[HOLD] is lit, the instrument returns
to the wait state. ( [HOLD] blinks.)
Press for at least 1 second
to cancel auto hold mode.
• If the input signal is too small for the relevant range, the
measured value cannot be automatically retained.
• The measured value is automatically retained after it
remains stable (for approx. 2 seconds) within the stable
range.