S/
NO 120
700 0 0 3 3
S/
NO 120
700 0 0 3 3
S/
NO 120
700 0 0 3 3
rear door
record
stop
record switch
192º rotating lens
dual alignment lasers
TRail™ mounting system
power indicator
serial number
charging indicator
battery slot
microSD
card slot
USB
power button
memory indicator
charging indicator
USB connection
record
stop
rear
press and hold
until lights
come on
front
push until
lights
come on
a, f
c
b
b
press and hold
for (1) second
attach leash
before using
after detaching, rotate
vertically to align and then
reattach firmly into mount
attach and adjust camera according to your riding position
(it’s no fun watching videos of the ground)
press and hold
for (1) second
rotate lens to align
lasers horizontally
Battery Status
Green light
Yellow light
Red light
No lights
Memory card status
Green light
Yellow light
Red light
Flashing Red
Power off
More than 66% full
Between 33% and 66% full
Less than 33% - time to recharge
Recharge your VholdR or power up again
More than 66% free recording space
Between 33% and 66% free recording space
Less than 33% - time to swap out cards or download
Your memory card is full, you are missing a card, or
your card has an error and needs to be formatted
(see Tips & Troubleshooting to format your MicroSD Card)
Press and hold rear button for 3 seconds or until all
lights turn off
aim lasers
record
stop
hold base of
mount firmly
against
surface as
you pull
camera
away
from
velcro
Now let’s align your VholdR. Remember, there is no screen so the lasers
are designed to give you a visual level of what you will be shooting.
Assume the riding position. Then press and hold the power button for one second until
the lasers turn on. Lasers will show for 5 seconds.
CAUTION: Avoid staring directly into the laser beams.
Aim the two laser points at your hand, a wall, or object in front of you. Rotate the FRONT
of the VholdR lens and/or adjust the mount until the lasers are aligned
HORIZONTALLY. This ensures the horizon is correctly aligned.
Note: There is a limit of just over 90 degrees in either direction so if you reach that point try rotating the
lens in the opposite direction or adjust the mounting position.
S/
NO 120
700 0 0 3 3
S/
NO 120
700 0 0 3 3
S/
NO 120
700 0 0 3 3
rear door
record
stop
record switch
192º rotating lens
dual alignment lasers
TRail™ mounting system
power indicator
serial number
charging indicator
battery slot
microSD
card slot
USB
power button
memory indicator
charging indicator
USB connection
record
stop
rear
press and hold
until lights
come on
front
push until
lights
come on
a, f
c
b
b
press and hold
for (1) second
attach leash
before using
after detaching, rotate
vertically to align and then
reattach firmly into mount
attach and adjust camera according to your riding position
(it’s no fun watching videos of the ground)
press and hold
for (1) second
rotate lens to align
lasers horizontally
Battery Status
Green light
Yellow light
Red light
No lights
Memory card status
Green light
Yellow light
Red light
Flashing Red
Power off
More than 66% full
Between 33% and 66% full
Less than 33% - time to recharge
Recharge your VholdR or power up again
More than 66% free recording space
Between 33% and 66% free recording space
Less than 33% - time to swap out cards or download
Your memory card is full, you are missing a card, or
your card has an error and needs to be formatted
(see Tips & Troubleshooting to format your MicroSD Card)
Press and hold rear button for 3 seconds or until all
lights turn off
aim lasers
record
stop
hold base of
mount firmly
against
surface as
you pull
camera
away
from
velcro
When sliding the switch all the way forwards or backwards you will feel a
slight click to indicate the switch is in the final position.
Start Recording: Slide the record switch forward towards the lens.
Indicator: you will hear (1) beep. The red power light (in front) will blink.
Stop Recording: Slide the record switch back against the rear door.
Indicator: you will hear two beeps. The red power light (in front) will stop blinking.
Note: Slide the switch all the way forward and backwards until you feel a slight click to indicate the switch
is in its final position. Be patient with hearing the beeps, but if you do not hear the proper beeps please
see Tips and Troubleshooting.
1
2
•
•
14
15
Align
Record Video
Align
Record Video
Summary of Contents for VholdR 1102
Page 1: ...WELCOME TO USER MANUAL...
Page 17: ......
