Tweco ArcMaster 201 TS, Service Manual

Page: 59 / 80

DISASSEMBLY PROCEDURE TWECO 201TS
Manual 0-5150 7-9 Disassembly Procedure
6
Art # A-10176_AB
7.06 Power Switch S1 and Power Cord Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. Input Power Cord connection s to SW1.
Remove the stab-on wire connections from SW1.
2. SW1 locking tabs
Squeeze the locking tabs and push SW1 out from the rear panel.
3. Input Power Cord.
4. Strain relief screws
Remove the two (2) screws from the strain relief.
5 Input Power Cord ground wire filter.
Cut the tie-wrap and remove the magnet from the ground wire.
Pull the Input Power Cord out. It may be necessary to use a flat blade screw driver against the strain relief
tabs, prying outward (Internal side if strain relief) to help remove the cord.
6. Pull out the Input Power Cord.
7. Remove fan.