Assembly Instructions VERA RF600
6
1. Safety | Intended use
To avoid risks please observe the following safety instructions when using accessories.
The VERA RF600 rigging frame was developed for use in professional sound systems. The rigging
frame may only be used by trained and qualified personnel.
Damage caused by improper use is not covered by TW AUDiO.
Before each installation, check the integrity of the VERA RF600 rigging frame and ensure that all
components are in perfect condition.
The scope of delivery includes a specified load adapter with shackle. Only use this load adapter.
WARNING
The VERA RF600 rigging frame may only be used with the VERA20 and VERA S32 loudspeakers.
These assembly instructions describe how to use the VERA RF600 rigging frame. Any other use
shall be deemed improper and may result in damage or even injury.
Modifications or alterations to individual parts of the VERA RF600 rigging frame and the VERA LA900
load adapter are not permitted! Danger to life!
WARNING
During and after each system setup, check that all quick-lock pins are always completely inserted!
All quick-lock pins must always be used!
WARNING
The VERA RF600 is an accessory designed both for indoor and outdoor use.
CAUTION
The VERA RF600 rigging frame may only be used by trained and qualified personnel. Personnel
must check the VERA RF600 for its full suitability before each use.
WARNING
When visible damage to any part of the VERA RF600 rigging frame is detected, it must be decom-
missioned immediately.
WARNING
Before mounting the VERA RF600 rigging frame, all attachment points – such as ceilings and cross-
beams – must be checked for full load capacity and stability.
The VERA RF600 accessory is specified for a load of not more than 24 (twenty-four) VERA20
loudspeakers or twelve (12) VERA S32 loudspeakers. This load capacity must never be exceeded!
WARNING
