Assembly Instructions VERA RF600
27
4.13 VERA S32 ground stack setup, from the 2nd speaker
Figure 4.13.1 – Inserting the box link connectors into the VERA S32 loudspeaker
(top)
1. Please note that setting up the VERA RF600 rigging frame always requires two persons!
WARNING
Figure 4.13.2 – Inserting the quick-lock pins
To set up the ground stack array, starting from the second VERA S32 loudspeaker, pro-ceed
as follows:
2. Insert all four box link connectors from the box link set into the flying tracks of the
VERA S32 loudspeaker.
3. Pay attention to the alignment of each box link connector. The “OUTSIDE” labels on all
box link connectors must be visible from outside.
NOTE
4. Insert the lower quick-lock pin of each box link connector into the upper holes of the
VERA S32 loudspeaker’s flying track.
5. Make sure that all quick-lock pins are always completely inserted!
WARNING
A
B
