Assembly Instructions VERA RF600
53
4.21 Flown system setup with VERA S32 loudspeakers
1. Please note that setting up the VERA RF600 rigging frame always requires two persons!
WARNING
Figure 4.21.1 – VERA RF600 rigging frame
To set up the flown system with VERA S32 loudspeakers, proceed as follows:
2. Use the EASE Focus software to determine the number of VERA S32 loudspeakers
suitable for your application.
NOTE
6. Loosen all four quick-lock pins on the VERA RF600 rigging frame.
7. All four splay links in the front rigging rails must be extended downwards.
NOTE
3. Remove the covers from the CaseRF600 transport case.
4. Insert the hook of your chain hoist into the shackle of the VERA LA900 load adapter,
which is mounted on the VERA RF600 rigging frame. The pin points suitable for your
application have been previously selected.
5. Actuate the chain hoist and raise the VERA RF600 rigging frame carefully from the
CaseRF600 transport case.
WARNING
