DRIVE CHAIN
Proper lubrication and adjustment of drive chain
gives long service life of chain. Poor maintenance
of chain causes premature wear or damage to the
drive chain and sprockets.
The drive chain must be checked, lubricated and
adjusted at specified intervals mentioned in the
maintenance schedule.
If the vehicle is used under severe conditions and
more dusty area, the drive chain must be attended
more frequently. Get the drive chain checked,
lubricated and adjusted at TVS Motor Company
Authorised Distributor or Dealer / Authorised
Service Centers at specified intervals if required
more frequently depending upon usage.
FRONT WHEEL REMOVAL
1. Remove the hexagonal nut along with washer
from either LH or RH side of front axle.
2. Pull out the axle from the wheel along with the
hexagonal nut and a washer.
3. Place a support (wooden block) below the
engine to prevent the vehicle from falling.
MAINTENANCE
-33-
4. Lift the front fork up, dislocate the brake panel
along with the brake cable. Remove the hub
drive and slide the wheel out.
5. Reverse the procedure for reassembling.
Locate the lug on fork leg L to the slot in the
brake panel while reassembling.
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque.
Warning
MAINTENANCE