-7-
2. Horn switch
Press the switch ‘ ’ to operate the horn.
3. Turn signal lamp switch
Slide the turn signal lamp switch to left ‘ ’ or
right side ‘ ’ to operate respective turn signal
lamps (LH/RH). Slide the knob to the center
position to turn ‘OFF’ the lamps.
4. Rear brake lever
The rear brake is applied by squeezing the rear
brake lever gently towards the handle grip. The
brake lamp glows on application of the rear brake.
5. Head lamp switch
Head lamp switch has two positions, they are:
OFF : Head lamp and speedometer lamp are
turned ‘OFF’ when the switch is positioned
at ‘ ’ even though the engine is running.
ON : Head lamp and speedometer lamp glows
when the switch is positioned at ‘ ’ and
engine is running.
KNOW YOUR TVS XL 100
KNOW
YOUR
TVS
XL
100
6. Head lamp high / low beam switch
With the head lamp in ‘ON’ condition, slide the
beam control switch towards ‘ ’ to turn-on the
head lamp high beam. Slide the switch towards
‘ ’ to turn-on the head lamp low beam.
Warning
Always use the appropriate turn signal lamps when
you intend to change lanes or take turns. Be sure to
switch ‘OFF’ the turn signal lamps after negotiating
the turns or lanes.
Use appropriate head lamp beam ‘high / low’ as per
the traffic and road conditions for your safety and to
avoid inconvenience to other riders.
In ‘i-Touch Start, models, if the vehicle is left in
idling for more than 20 seconds (approx.) with the
head lamp ON condition, the intensity of the head
lamp will reduce automatically to avoid draining of
battery.
Note
