61
61
REAR WHEEL REMOVAL AND REASSEMBLY -
DISC TYPE
1. Remove the axle nut (1) along with the washer
and partially pull out the axle (2).
2. Take out the caliper assembly by dislocating it
from the disc and the swing arm lug. Carefully
hang the caliper assembly in the swing arm itself.
3. Take out the spacer and pull out the axle fully.
4. Remove the wheel assembly by gently tapping it
along with the disc.
5. For locating and easy reassembly of the wheel,
enage the gear. This will arrest the free movement
of the drum sprocket.
2
1
6. Re-assemble the other parts in the reverse order
of removal.
While assembling the caliper assembly ensure that the
slot provided in the caliper is properly located to the lug
provided in the swing arm assembly.
Always make sure that whenever the wheel is removed,
axle nut is properly re-tightened to the specified torque
and chain play is re checked and adjusted if required.
