manualshive.com logo in svg

TVS Apache RTR 160 BS-VI, Owner'S Manual

Share
Download
TVS Apache RTR 160 BS-VI Owner'S Manual Download Page 43

30

REAR BRAKE PEDAL

The rear brake pedal operates the rear brake system 

and it is located adjacent to the right side foot rest. 

To control the speed of your vehicle close the throttle 

completely, and gradually press the brake pedal 

downwards. 

Rear brake pedal position can be set to your convenience. 

Contact your TVS Motor Company Authorised Main 

Dealer / Authorised Dealer for setting the brake pedal 

position. Incase of rear drum brake model, after setting 

the brake pedal position, adjust the rear brake paly as 

explained in page No. 55.

Independent use of rear or front brake reduces the 

overall braking efficiency. In extreme conditions braking 

with only rear or front brake may lock the wheel which 

would result in skidding or toppling of vehicle.

Braking performance is affected adversely with wet 

surfaces, loose surfaces and overheating of brake system 

due to unnecessary continuous application of brakes. 

For safety, exercise extreme caution while braking and 

also at turning. Do not accelerate while turning.

Summary of Contents for Apache RTR 160 BS-VI





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands