25
25
HANDLE BAR RIGHT SIDE
1. Electric starter switch
Ensure the transmission is in neutral or else press
the clutch lever before engaging the electric starter
switch ‘ ‘.
2. Engine cut off switch
It is ‘ ‘used to switch off the engine but to keep
other DC system active. The ignition circuit is
disabled, preventing the engine from being restarted.
To restart the engine, return the switch to the ‘ ‘
position.
3. Front brake lever
It controls a hydraulic circuit (ABS) that operates
the front brake system. The front brake is applied by
pressing the front brake lever gently towards the grip.
The brake lamp glows on application of front brake.
4. Throttle grip
It controls the fuel-air mixture supplied to the engine,
which regulates the engine speed. Rotate the throttle
grip in counter-clockwise from its idle position to
increase the engine speed and vice-versa to reduce.
3
2
4
1
Ensure to turn ON the engine cut-off switch before
starting the vehicle.
Release the electric starter switch immediately after
pressing.
With the ignition switch ON and engine kill is turned
ON, priming noise of fuel pump may be heard which is
absolutely normal.
Frequent switch ‘OFF’ & ‘ON’ of ignition to be avoided to
prevent unnecessary run of fuel pump.
