manualshive.com logo in svg

TVS Apache RTR 160 BS-VI, Owner'S Manual

Share
Download
TVS Apache RTR 160 BS-VI Owner'S Manual Download Page 39

26

Apache RTR 160 is provided with adjustable LH and RH 

handles. Contact your TVS Motor Company Authorised 

Main Dealer / Authorised Dealer for any such adjustment.

Please do not adjust the handles your self or by any 

unauthorised persons. Improper adjusment may affect 

the maneuverability of the vehicle.

FUEL TANK

#

 CAP

Flush type fuel tank cap (1) is provided in TVS Apache 

RTR 160. To open the fuel tank cap, lift the protection 

lid (2), insert the control key into the lock, turn it in 

clockwise direction and take out the tank cap along 

with the key.
To close the cap, press the cap gently in its position 

by keeping the front end (     ) towards the handles. 

Take out the key while ensuring the proper locking of 

the cap and close the protection lid.

#

  The fuel tank is not a measuring instrument and the capacity 

of the fuel tank may slightly vary from the indicated capacity.

2

1

Summary of Contents for Apache RTR 160 BS-VI





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands