✦
✦
✦
✦
✦
DOs and DON’Ts
DOs
1.
Do place the printer on uniform surface.
2.
Do use TVS-E Genuine Ribbons and Inkbanks, for better print quality and
long Printhead life.
3.
Rotate the ribbon in the direction shown on the ribbon cassette.
4.
Do adjust head gap while using multi-part stationery.
5.
Always stack the continuous sheet below the printer stand to avoid paper
jam.
6.
Close the Top cover while printing, to guide the paper properly to exit
path. This also prevents dust entering into the printer.
DON’Ts
1.
Avoid placing your printer exposed to direct heat or sunlight.
2.
Do not print on platen / paper when the ribbon is not installed.
3.
Do not unplug / plug the interface cable when the printer is ON.
4.
Do not lubricate the plastic parts, Printhead, paper moving paths.
5.
Do not hold or reverse the platen knob while the printing is ON.
6.
Do not use abrasive cloth, alcohol, paint thinner or similar agents to
avoid discoloration and scratching.
7.
Do not move the Printhead, when the printer is in ON condition.
58
