✦
✦
✦
✦
✦
Connecting the printer to your computer
Your MSP 450 champion communicates with the computer through Centronics
Parallel Printer cable, which comes along with your printer. Before making any
connections, turn off both your printer and your computer.
To connect the parallel cable to your printer, follow these steps:
Switch off the printer.
The connector is on the right side of the printer as shown in the figure.
Move the wire latches out of the way and fit the cable connector onto the
printer connector. Be sure the connectors are firmly attached, but do not
use a lot of force; it is possible to bend or break the connector pins.
Press the wire latches into place to secure the cable connector.
Wire Latches
16
