CC-300 CORIOconsole Operation Manual
27
Fig 14. An example of the trigger event configuration menu
showing that event 11 will be triggered 3 times (repeat twice)
with a 0.5 second intervals when shift+F2 key is pressed.
Should the ‘Hot key’ no longer be needed it can be deleted by using the
Delete configuration key and then ENTER to confirm, the settings may not
remain in the event of a power recycle unless the settings are made
permanent by selecting Save configuration and then press ENTER to confirm
your choice.
The ESC key will return you to Trigger event menu.
Once a ‘Hot key’ is set, the trigger can be sent while connected to a TVOne
video processor by holding the shift key + the key set (F2 in the above
example).
5.7
Locking the keyboard
To prevent accidental key presses, all keys can be disabled by pressing both
shift keys together. The legend ‘KEYBOARD LOCKED’ will be displayed as a
reminder. Pressing both shift keys together again will unlock them, a message
will appear in the lower right of the display to indicate that unlock has
occurred.
5.8
Standby mode
The system menu has a standby softkey which will turn off all non essential
functions and provide a low power standby mode. Pressing the ‘Take’ key will
reset the unit and bring it back to the same state as a power recycle.
