1
[ INTRODUCTION]
The pipe inspection system is a powerful set of tools that helps you locate and diagnose problems in a pipeline
system.
The system is widely used in inspections of Sewer, central air conditioning, chimney, plumbing, building, cable pipe
and pipe ventilation systems and other places.
[GENERAL SAFETY RULES]
Precautions
Read all saf ety warnings and instructions. Failure to f ollow warnings and instructions may result in electric
shock, fire and/or serious injury.
1. Save this operation manual for future reference.
2. Do not operate this device in explosive atmospheres, such as in the presence of flammable liquids, gases, hazardous
chemicals, superheated liquid or heavy dust. It may create sparks which may ignite the dust or fumes.
3. The camera head and the push cable are waterproof(when camera installed on rod cable), however, the battery pack,
DVR and connecter cable are not. Do not expose them to water or rain when the control box is open. This will increase the
risk of electrical shock.
4. Avoid using the device in environments of extreme cold, heat or humidity as it may damage the device.
5. Do not drop or press hard on the device.
6. Always backup your data before inserting your SD memory card to this system. The manufacturer is not responsible for
any data loss or damage on your SD memory card for any reason.
7. Do not disconnect the unit while recording or playing back. It may damage the unit and/or the SD memory card.
8. Only qualified person are allowed to repair this device. Service or maintenance performed by unqualified person could
result in injury.
9. Do not use this device in places where there is high voltage equipment. The device doesn’t contain high voltage protection
and isolation.
10. Do not use this device in places where there is high voltage equipment. The device doesn’t contain high voltage protection
and isolation.
[APPLICATION AND KNOW YOUR TOOL]
Application
Suitable for pipes at diameter of 25mm-200mm. Ability to go through 90° bends in pipe DN45mm.
Know Your Tool
The pipe inspection system includes the following four main parts: Camera head, cable reel, battery pack and
DVR.
The camera head includes high-light white LEDs and a highly scratch-resistant sapphire lens cover; this coupled
with stainless steel housing allow the camera to withstand repeated hits in various pipes.
Flexible stainless steel spring and associated components make the camera head possible to go through bend
pipes. Also the battery pack provides power supply for the system and the DVR monitor can record video and
take photos.in and out without the need to hold the reel. Further, the battery pack provides power supply for
the system and the DVR monitor can record video and take photos.
Summary of Contents for 3199F-14
Page 16: ...15 ...
