9. CH+:
Change channels or items from top to bottom on the menus
10. CARD SLOT:
Decode the smart card (You can select open or close the door)
2. Rear panel
1. RF IN:
Use to connect an antenna.
2. RF LOOP THROUGH:
Use it when connecting to another STB
3. TV SCART:
Use this connector to connect your receiver with your TV set using a SCART
cable
4. CVBS:
Video Output.
5.
AUDIO L/R:
These sockets output Analog Audio signal (White/Red)
6. HDMI:
High definition multimedia interface
7. DC12:
power cable coupler
8. SPDIF:
Digital audio output
9. COMPONENT VIDEO OUT:
Componet video output socket for TV set
(Red/Blue/Green)
Remote Controle
POWER:
Switch the receiver in and out of standby model.
MUTE:
Disable Audio output
<0>-<9>:
Numeric keys.
CH-/CH+:
Program changing keys.
MENU:
Display main menu on TV screen, and press again to exit current
menu.
OK:
To confirm current setting, or display all programs in no-menu mode.
VOL-/VOL+:
Turns up/down volume.
▲▼►◄
:
Press to move the cursor.
EPG:
Shows the Electronic Program Guide.
FAV:
Display your favorite channels list. Press FAV again to access to the
other favorite lists.
V-FORMAT:
Switch the HDMI 720P and 1080P.
RECALL:
Go back to the previous viewed channel.
Red/green/yellow/blue:
Use to navigate between pages in teletext mode and
special functions in menu or EPG
PVR:
Use to access recorded current in USB drive
ASPECT:
Switch 4:3/16:9.
TTX:
Switch on Teletext, if current channel has this option ,and use EXIT key
to quit Teletext