4
MG-WP-611 Series
1
2
V
T
x
R
x
OUT
R S 232
H
D
B
T O
U
T
MG-WP-611-US
MG-WP-611-EU
PoH
IN
HD
BT
OU
T
IN
OUT
RS232
12V
12V
Tx Rx
REAR PANEL
Name
Description
HDBT OUT
HDBaseT output, connects with HDBaseT Receiver over a
single Category cable to deliver AV signals, support PoH.
IN
12V input, connects with power adapter.
OUT (future)
This is a 12V output to be used with future products
RS-232
Serial port to control This device or third-party devices via RS-
232 commands.
Button Control
SOURCE/AUTO
Press and hold the SOURCE/AUTO button for approximately 3 seconds.
When the button lights up green the Device is in AUTO mode. This mode
automatically selects the last video source connected to the wall plate and
outputs it to the display. Press and hold again for approximately 3 seconds,
the light will go out, and the device will be in Manual mode which will allow
the user to momentarily press the button to toggle between the two sources.
RS-232 Control
This Wall plate can be controlled locally or through a receiver via serial
commands and/or control 3rd party devices connected to it. Depending on
how the device is being control you must set the RS-232 control mode (1 or
MG-WP-611-US
MG-WP-611-EU
