3
MG-WP-611 Series
LINK
R E S E T
FIR MWAR E
SOURCE /AUTO
POWER
VGA IN
VGA
AUDIO IN
HDMI
HDMI IN
4.0 OPERATION CONTROLS AND FUNCTIONS
FRONT PANEL
Name
Description
POWER or ( )
LED indicator glows red when power is applied.
LINK
LED indicator glows green when an HDBaseT link is
established.
HDCP
LED indicator glows green when an HDCP link is
established.
RESET
This button performs a soft reboot of the Wallplate
Transmitter.
IR
Built-in IR sensor to receive IR signal from IR remote. (EU
only)
SOURCE/AUTO
Button switches sources, Press and hold for 3 seconds to
change mode between Auto and Manual source select.
LED indicator glows green when in Auto mode.
VGA & VGA IN
VGA – LED indicator glows green when the VGA input is
active, amber when a source is available, and does not
light when there is no source connected.
AUDIO IN
3.5mm stereo audio connector supplies audio for the
VGA input.
HDMI & HDMI IN
HDMI - LED indicator glows green when HDMI input is
active, amber when a source is available, and does not
light when there is no source connected.
FIRMWARE
Micro-USB connector used to update firmware. (side
panel for EU)
MG-WP-611-US
MG-WP-611-EU
