C2-7000 S
ERIES
O
PERATION
M
ANUAL
50
There are several types of signals that are called RGB signals as a generic
term. Each has slightly different characteristics that set it apart from similar
RGB signals – such as how the synchronization signal is sent. This menu
item lets you set the input type to use.
Available options let you select whether the input is standard RGB or YUV
(including YPbPr signals with a tri-level sync).
This menu item lets you adjust the individual RGB or YUV/YPbPr signals, in
case one component is at a different contrast to other, or if they all need to be
boosted or lowered.
An interlaced input consists of two fields separated in time. Both fields are
required in order to make up the full resolution input image, but since they are
sent one after the other, a moving image will have “motion artifacts” if the two
fields are simply combined together. The most common artifact is a blurring
at the point of maximum movement within an image. Your unit provides some
tools to minimize the effects of de-interlacing of an image.
The following options are available for this menu item:
Mode
Function
Normal
The two interlaced fields are simply combined together.
This will often show artifacts on moving images, but can be
used when the input is known to be still.
Auto
Automatically selects Film 3:2 or Medium Range Motion
Compensation (M. Comp Med.) depending on whether Film
Mode is detected or not. For 1080i sources, a special de-
interlacing mode is selected to eliminate combing effects.
Film 3:2
Enables 3:2 pull down conversion of the incoming NTSC
video. (This option should not be used if the source is not
NTSC video).
M. Comp Low
M. Comp Med.
M. Comp High
Enables Pixel Adaptive Motion Compensation. Three levels
are available with ‘Low’ providing the least compensation
for Motion and ‘High’ providing the most compensation.
Source : RGB1
De-int [M.comp med]
Source: RGB1
RGB contr. [100] [100] [100]
Source: RGB1
RGB input type [RGBHV]
Summary of Contents for C2-7000 Series
Page 120: ......
