1T-C2-750 & 1T-C2-760 O
PERATION
M
ANUAL
17
5.2
MENU
and
buttons
The on-screen display (OSD) is controlled from the front panel by using these
buttons. MENU will activate the OSD, whilst the
and
arrowed keys will allow
different menu items to be selected and adjusted – this is detailed in a later section.
5.3
Advanced menus
The above menu item must be ‘On’ to activate certain menu items. These typically
control the more advanced items in the menus.
5.4
Special button combinations and functions
Various button combinations are available to perform certain functions:
These button combinations only work when the unit is switched
on and active i.e. with the STANDBY/ON LED off.
5.4.1
Locking front panel buttons & IR remote control
This can be performed by pressing STANDBY/ON and INPUT at the same time. All
front panel buttons and IR remote commands will be disabled, with the exception of
repeating the above combination to un-lock the unit and for storing the current
locked buttons setting (thus letting you make sure the unit always starts up with the
buttons locked). The IR remote’s LOCK and STORE buttons will always be active,
giving another way to turn button/IR remote locking off.
The STANDBY/ON button will flash when the unit’s buttons are locked.
5.4.2
Restore power-on settings
Should your current settings not allow you to see the on-screen display (OSD),
restoring the last-saved settings might be useful. This can be done by pressing
STANDBY/ON and MENU at the same time until a single beep is heard.
5.4.3
Factory Reset
If you wish to restore all operational parameters to their original condition (for
example, if saved settings prevent the unit from working with your display monitor),
hold the STANDBY/ON and MENU buttons in together until at least two beeps are
heard.
System
Advanced menus [Off]
