1T-C2-750 & 1T-C2-760 O
PERATION
M
ANUAL
45
The color of the border can be changed to any color by adjusting the Y, U and V
parameters. Y is the luminance, with U and V altering the blue and red content
respectively. E.g. increase both U and V to give a purple colour, or decrease both
to give a green colour.
This parameter controls how visible the border is to the viewer. A setting of 0
renders the border invisible (transparent) whereas a setting of 100 makes the Logo
fully visible. (In-between settings can give the Border a transparent appearance.)
8.8
Items associated with the Adjust transitions group
Please note that not all units have this sub-menu – it is only available on some
units with overlay and keying abilities.
Transitions control how your unit responds when a source is changed. Fades
between sources, as well as wipes and cuts, are possible. The amount of time
taken by a transition is controllable from instant transition (a ‘cut’) to several
minutes.
This first adjustment controls the type of transition desired: ‘Cut’, ‘Fade’, ‘Wipe’ or
‘Push’.
If you select ‘Cut’ or ‘Fade’, the only remaining menu items will be ‘Switching Fade
Time’ and ‘Exit’. Selecting ‘Wipe’ or ‘Push’ exposes additional parameters.
This parameter controls how long a transition from one input to another takes. The
value can be 0 (a cut) or several minutes - adjustable in 1/10
th
second increments.
If you selected ‘Wipe’ or ‘Push’ for the transition type, then you will be able to
specify the ‘movement direction’ of the transition that you want. Both ‘Wipe’ and
‘Push’ support: Left to Right, Right to Left, Up/Down (Top to Bottom), Down/Up
(Bottom to Top). ‘Wipe’ also supports: Diagonal and Diamond effect.
Adjust transitions
Transition [Fade]
Adjust transitions
Switching fade time [ .5]
Adjust transitions
Wipe type [Left -> Right]
Adjust borders
Brdr Y/U/V [16] [128] [128]
Adjust borders
Brdr opacity %
[100]
