1T-C2-750 & 1T-C2-760 O
PERATION
M
ANUAL
51
This parameter is available on certain units and allows the LCD contrast (viewing
angle) to be altered.
This parameter is available on certain units and controls how bright the LEDs on
the front panel appear.
This menu item controls the type of serial port in use on certain units (not all units
support this feature). Options available are RS-232, RS-422 and RS-485. The
default is RS-232.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600, 38800,
57600 and 115200. (This adjustment is provided for those instances where you
wish to use the RS-232 control system for your own purposes.) The default baud
rate is 57600.
The screen labeled ‘Buzzer’ is actually the control for turning the “Beep” “On” or
“Off”. Normally this is left in the “On” position to provide positive feedback that your
data entries and parameter changes have been accepted.
This menu item changes the function of an attached CC-300 CORIOconsole unit.
When set to ‘On’ any ‘Take’ will result in the A & B windows (‘buses’) being
swapped at the end of the Take – so that another ‘Take’ will put them back to as
they were before. (Note that not all units support the CC-300.)
System
RS232 baud rate
[57600]
System
Buzzer [ On]
System
CC-300 A/B bus mode [ Off]
System
Serial type [RS-232]
System
LED brightness % [ 90]
System
LCD contrast [200]
