MOL
®
LIK module - Operating and Maintenance Manual
Version: 10/2016
MOL Katalysatortechnik GmbH, 06217 Merseburg, Germany
12/ 22
5
Installation
Assembly must be performed according to the MOL Katalysatortechnik
GmbH documentation and by qualified personnel in accordance with DIN,
VDE or locally valid specifications
The user must ensure that the MOL
®
LIK module is assembled and installed
in such a way that their safe use (and maintenance) is not affected.
The module is suitable for use in non-pressurized vessels. Appropriately, certified catalyst modules
are available for use in pressure vessels. The use of appropriate upstream filter technology has been
proven to minimize the cleaning time on the catalyst module.
The module is inserted in the fluidic stabilized (non-turbulent) area - but with a good streamflow - and
optionally secured with a safety chain.
The area above the installation site should be kept clear for installation purposes and for maintenance
works on system equipment (e.g. pipes, air ducts, etc.) or attention must be given to provide sufficient
spacing for this system equipment.
This installation site should be easily accessible.
