Page 27
b.
Failure that occur after completing the sterilization stage, which in this
case will leave the load sterilized
For the list of
Displayed
Error Messages / Symbols
see sec. 13.
4.4
Displayed operational messages / Symbols
Message /
Symbol Name
Message /
Symbol
Description
Required Action
This symbol is displayed when
the door is open.
Close the door.
Door is open
(during stand by)
This message is displayed
when the door is opened: In
standby - if
START/STOP
is
preset.
Close the door to
perform a new cycle.
Cycle Ended
This message is displayed
when the cycle ended
successfully.
Press
START/STOP
in
order to perform a new
cycle.
Test Ended
This message is displayed
when the test ended.
Press
START/STOP
in
order to perform a new
test
This symbol is displayed when
Cycle by Clock mode is
performed.
Enter the Admin menu
as described in this
manual to change the
time or to cancel this
option.
Cycle by clock
This message is displayed if
the user presses
START/STOP
key while the
"cycle by clock" mode is
active.
Enter the Admin menu
as described in this
manual to change the
time or to cancel this
option.
Atmospheric
pressure not set
This message id displayed in
order to set the atmosphere
pressure by opening the door
for 5 minutes.
Open the door for 5
minutes in order to set
the Atmospheric
pressure.
Critical settings
have been
updated, Please
restart machine
in order for
changes to be
updated
If a change of the autoclave
setting was made, a restart
operation is required.
Restart the autoclave in
order for changes to be
updated.
