Page 75
Cautions!
Use only water having the characteristics as per table in sec 4.
Tap water may clog the system. A clogged system causes
increase of pressure, which prevent temperature from rising.
Under no circumstance should water be filled above the cooling
coil.
10.2
Turning on the autoclave
•
To start the system, turn on the main switch (1), located under the
printer cover.
The door is equipped with an electrical cylinder. This electrical
cylinder performs the automatic opening and closing of the door.
10.3
Opening the door
3.
Place your thumb on the plastic door cover and the other fingers in the
handle.
4.
Pull the handle until the locking of the door is released.
5.
Open the door.
When the door is open, the door open sign
is displayed.
1