12
DC000967-000 Rev.3
ACCESSORIES
The following accessories are available to customize your SP100 Pump. Contact your Sotera Representative if you have questions, or would like to
order any of the accessories listed below.
www.sotera.com
Learn more about Tuthill Corporation and our family of high quality, value minded products at:
www.tuthill.com
Sotera Systems
8825 Aviation Drive
Fort Wayne, IN 46809
Visit us on the web at:
REGULATORY COMPLIANCE
The Sotera SP100 1” Air Operated Diaphragm Pump has been tested and complies to the rigid standards for certification by the following regulatory
agencies.*
Polypropylene (non-conductive) models comply with European standards:
2006/42/EC – Machinery
BS EN ISO 12100:2010, Safety of machinery – General principles for design – Risk assessment and risk reduction
BS EN 809:1998 – Pumps and pump units for liquids – Common safety requirements.
Models for use in
AT
mosphere
EX
plosive
(ATEX)
that comply with European standards:
94/9/EC - Directive on equipment intended for use in potentially explosive environments.
EN 13463 - 1 - Non-electrical equipment for use in potentially explosive atmospheres: Part 1: Basic method and requirement.
EN 13463 - 5 - Non-electrical equipment for use in potentially explosive atmospheres: Part 5: Protection by constructional safety “c”.
*
Refer to regulatory information printed on the top of the pump body for specific pump compliance.
Part #
Accessory
Description
KITS10WMA
Wall Mount Bracket
Steel bracket for wall mount applications of the SP100 Air
Operated Diaphragm Pump.
KITS10FRH
Filter / Regulator Kit
Air line filter, regulator, and hose
KITS05MUF
Muffler
Muffler for air exhaust
KITS10WCH
Assembly Wrench
Special service tool for use on fluid cap rings (13A in
diagram on page 8).