manualshive.com logo in svg

Tuthill SDV Series, Operator'S Manual, Page: 31 / 58

Share
Download
Tuthill SDV Series Operator'S Manual Download Page 31

25

Manual 1861   Rev C   p/n 001861 0000

Although Tuthill Vacuum & Blower Systems pumps are well designed and manufactured, problems may occur 

due to normal wear and the need for readjustment. The following chart lists symptoms that may occur along 

with probable causes and remedies.

SYMPTOM

PROBABLE CAUSE

REMEDIES

Insufficient pumping 

capacity

Clogged inlet filter and/or strainer

Clean or change the inlet filter and/or strainer.

Too much clearance

Check the screw “E” clearance and reset the 

clearance (reset the timing gear).

Motor overload

Clogged inlet filter and/or strainer

Clean or change the inlet filter and/or strainer.

Foreign matter is caught in the 

pump

Check the screw “E” clearance and reset 

(reset the timing gear) if needed. If the 

screws and/or casing are damaged by foreign 

material, replace the screw and/or casing.

Significant increase of inlet 

pressure

Check the pressure differential between the 

inlet and outlet of the pump.

Interference between screws

Reset the screw “E” clearance (reset the 

timing gear).

Interference between screws and 

casing

Reset the “D” clearance.

Blocked discharge nozzle or piping 

and increased backpressure

Drain and clean the discharge nozzle and 

piping.

TROUBLESHOOTING

09

Summary of Contents for SDV Series



























































Reviews:

No comments