manualshive.com logo in svg

Tuthill SDV Series, Operator'S Manual, Page: 29 / 58

Share
Download
Tuthill SDV Series Operator'S Manual Download Page 29

23

07

Maintenance and Inspection

Manual 1861   Rev C   p/n 001861 0000

MAINTENANCE AND INSPECTION SCHEDULE

ITEM

CHECK POINT

DAILY

MONTHLY QUARTERLY

6 MOS.

YEARLY

Motor amperage

Any change? Amperage as specified?

X

Rotation

Is the rotation smooth and direction correct?

X

Suction and discharge pressure

Is the pressure as specified?

X

Noise and vibration

Any abnormal sound or vibration?

X

Temperatures

Any excessive oil or water temperature?

X

Cooling liquid leak

Check for leakage of the cooling liquid.

X

Oil level gauge

Is oil at proper level?

X

Water contamination on free end cover What is the color? Has it changed to reddish 

brown?

X

Cooling water pressure

Is the pressure as specified or too high?

X

Grease

Is grease color dark, contaminated, or broken 

down?

X

Oil leaks

Any signs of oil leaks?

X

Reverse cooling filter (cooler)

Any heat on suction pipe?

X

Belt tension

Check V-belt tension.

X

Lubricant color

Check color. If dark, replace lubricant.

X

Oil level

If oil level drops drastically, check mechanical 

seal.

X

Oil/grease change

X

Suction and discharge piping

Is there any accumulated scale or dirt?

X

Process and utility piping and supports

X

Pump casing interior and screw 

surfaces

Any signs of rust or flaws?

X

Mechanical seal, oil seal, bearing, 

O-ring, V-belt, and packing

Inspect for damage and replace as needed.

X

Timing gears

Inspect for damage.

X

Summary of Contents for SDV Series



























































Reviews:

No comments