10
4.7 PIPING
The intake and discharge
connections on your Qube are
large enough to handle maximum
volume with minimum friction
loss. If remote blower air intake
is used, be certain all external
intake piping is internally clean
before connecting to your Qube.
DANGER
It shall be the responsibility of the installer to ensure that piping is adequate,
sealing between pipe joints is adequate for the process fluids and proper
process and pressure protection devices are in place. It is also the
responsibility of the installer to assure that process gasses are not vented
in a manner that would be hazardous.Refer to the manufacturer of the
process media to assure that proper safety precautions are in place.
CAUTION
The piping shall be the same size as the discharge connection on the blower
package. Smaller connections can cause higher discharge pressure.
FRONT VIEW
FRONT VIEW
QUBE 1600
QUBE 800
QUBE 400
FRONT VIEW
END VIEW
BACK VIEW
TOP VIEW
TOP VIEW
TOP VIEW
ISOMETRIC VIEW
ISOMETRIC VIEW
ISOMETRIC VIEW
END VIEW
BACK VIEW
END VIEW
BACK VIEW
PRESSURE
OR OPTIONAL
VACUUM
GAUGE
OIL
LEVEL
OIL
LEVEL
DISCHARGE
CONNECTION
OPENING FOR
OPTIONAL REMOTE
BLOWER AIR INTAKE
PRV
OPENING
INLET
EXHAUST
INLET FILTER
RESTRICTION
GAUGE
PRESSURE
OR OPTIONAL
VACUUM
GAUGE
INLET FILTER
RESTRICTION
GAUGE
FORK LIFT
COVER
FORK LIFT
POCKETS
PRESSURE
OR OPTIONAL
VACUUM
GAUGE
OIL
LEVEL
INLET FILTER
RESTRICTION
GAUGE
PRESSURE
RELIEF
VALVE
DISCHARGE
CHECK
VALVE
PRESSURE
RELIEF
VALVE
DISCHARGE
CHECK
VALVE
DISCHARGE
CONNECTION
BLOWER
AIR
INLET
CABINET
AIR
EXHAUST
12”
(304 mm)
TO
WALL
24”
(609 mm)
TO
WALL
24”
(609 mm)
TO
WALL
36”
(914 mm)
MIN.
VERTICAL CLEARANCE
FOR HOT EXHAUST AIR
CABINET
AIR
INLET
CABINET
AIR
EXHAUST
CABINET
AIR
INLET
BLOWER
AIR
DISCHARGE
FORK LIFT
COVER
OPTIONAL
OPENING FOR
REMOTE BLOWER
AIR INTAKE
Figure 2 - Locations of Qube Connections and Features
