7
Model
Pressure
125-5000 cSt
5-50,000 cSt
Fluid
TN740A
1000 PSI / 169 BAR
1-10 GPM (4-40 LPM)
0.4-4 GPM (1.5-15 LPM)
Hydraulic & Lube Oils
TN760A
400 PSI / 28 BAR
1.5-15 GPM (6-57 LPM) 0.6-6 GPM (2.3-23 LPM)
Hydraulic & Lube Oils
The calibration screw can correct for normal flow meter wear, and for other liquids within the group identified above. This
flow meter cannot be used on other liquids with significantly different viscosity.
Model
Pressure
1-2 cSt
3-25 cSt *
Fluid
TN860A
150PSI / 10 BAR
6-60 GPM (23-230 LPM) 6-60 GPM (23-230 LPM)
Water, gasoline, solvents,E85
*Diesel, kerosene, light fuel oil
This flow meter has been calibrated for use on
a specific liquid viscosity range
. The calibration adjuster can correct
for normal meter wear, but not for use on other liquids with significantly different viscosity. To change service to a
different liquid may require different drive & transfer gears (change requires a special tool) and re-calibration.
TN Meter Parts (cont’d)
Item
*
Qty.
TN740A
TN760A
Description
1
1
MC8600
MC8800
Nutating Disc Assembly / Measuring Chamber
2
1
RK8101
RK8101
Control Plate Assembly
3
1
RG3000
RG3000
Register Assembly
4
1
RK3700
RK3700
Register Housing and Reset Knob
Reference diagram on page 6 for Item numbers.
*
Reference diagram on page 6 for Item numbers.
Item
*
Qty.
TN860A
Description
1
1
MC8800
Nutating Disc Assembly / Measuring Chamber
2
1
RK8101
Control Plate Assembly (Fluorocarbon seals)
3
1
RG3000
Register Assembly
4
1
RK3700
Register Housing and Reset Knob
2
1
RK8201
Control Plate Assembly (PTFE seals)
TN 740 / TN 760 Series Meters
TN 860 Series Meters
mdi - Manufacturers Distributor Inc. | Phone: (813) 241 - 4900 | Fax: (813) 571 - 0422 | www.FillRitePumpSales.com | [email protected]
