background image

2

 

Description 

Compact, efficient heater with stainless steel housing and positive hose-barb air connection for heating air or inert 
gases to 1400°F (760°C).   Built in “K” Thermocouple allows for closed-loop control of temperature to ±1°F of set 
point.   If operated correctly, the heater will operate continuously for 5000 hours or longer.

 

Limited Warranty 

Tutco  SureHeat 

warrants  that  all  products  to  be  delivered  hereunder  will  be  free  from  defects  in  material  and 

workmanship at the time of delivery.  

Tutco SureHeat

’s obligation under this warranty shall be limited to (at its 

option) repairing, replacing, or granting a credit at the prices invoiced at the time of shipment for any of said 
products.  This warranty shall not apply to any such products which shall have been repaired or altered, except 
by 

Tutco  SureHeat

, or which shall have been subjected.  

Tutco  SureHeat

 shall be liable under this warranty 

only if (A) 

Tutco  SureHeat

 receives notice of the alleged defect within sixty (60) days after the date of 

shipment; (B) the adjustment procedure hereinafter provided is followed, and (C) such products are, to 

Tutco 

SureHeat

’s satisfaction, determined to be defective. 

THE WARRANTY SET FORTH IN THE PRECEDING PARAGRAPH IS EXCLUSIVE AND IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED 
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY. 

The  information  contained  in  this  manual  is  based  on  data  considered  to  be  true  and  accurate.  
Reasonable  precautions  for  accuracy  has  been  taken  in  the  preparation  of  this  manual,  however 

Tutco 

SureHeat

 assumes no responsibility for any omissions or errors, nor assumes any liability for damages that 

may result from the use of the product in accordance with the information contained in this manual. 

Please direct all warranty/repair requests or inquiries to the place of purchase, and provide the following 
information, in writing: 

(A)

Order number under which products were shipped

(B)

Model/Serial Number of product

(C)

Reason for rejection

PRODUCTS CAN NOT BE RETURNED TO 

TUTCO SUREHEAT 

WITHOUT AUTHORIZATION. 

Replacement, repair, or credit for products found to be defective will be made by the place of purchase.  All 
products found to be not defective will be returned to the Buyer; transportation charges collect or stored at Buyer’s 
expense. 

Summary of Contents for F068462











Reviews: