2
NOTICE: The PPE (Personal Protective Equipment) mentioned in this User’s Manual
was submitted to tests for validation of the design and certified according to Art. 10 of
Directive 89/686/EEC by ITALCERT - Viale Sarca 336, 20126 Milano ITALY, Notified
body n° 0426. This device is in compliance with EN 1809:1997 (PPE belonging to
category II) and EN 250:2000 (PPE belonging to category III).
The CE marking means the compliance of the device to the Basic Health and Safety
Requirements of Annex II of Directive 89/686/EEC. The number 0426 near the CE
identifies the Notified Body ITALCERT, entitled for the EC quality control system for
the final product according to Art. 11.A of Directive 89/686/EEC."
The definition of SCUBA according to EN 250:
- demand regulator, - air cylinder with cylinder valves
- carrying harness / support for air cylinder (your B.C.J.!)
- safety device/s (e.g. your Pressure gauge) , - facepiece / mouthpiece
This device is a component of your SCUBA. Remember that a SCUBA must be
composed only of CE marked components. Please read carefully the User’s Manuals
attached to all the components you intend to use to assemble your SCUBA."
Tabata cannot be considered responsible for any damage / injury to persons or things
for eventual uncompatibilities / misuse due to use of non CE marked components.
