GB
13
3. Insert the required amount of weights in the weight cartridge (possible to load up to
4kg/8.8lbs in each cartridge). (Fig. 26)
LOADING THE WEIGHTS (BCJ-8000C)
The BCJ-8000C is equipped with a weight loading system. If the weights are loaded
into the weight loading system, the underwater trim and balance of the BCJ is ideal.
Load the weights as outlined below.
The photos are for reference only. When loading weights, do so only after attaching
the BCJ onto the tank. If you attempt to load the weights beforehand, it might be
difficult to attach the tank due to the heavier load.
1. Securely hold the weight release knobs at the bottom of the pockets on the left and
right of the main unit. (Fig. 23)
2. Turn the knobs clockwise or counterclockwise to release the safety lock. Due to the
safety mechanism, there may be sections where you feel a slight pull, but the
weight cartridge can still be pulled from the mounting holder. (Fig. 24 and 25)
(Fig. 24)
(Fig. 25)
(Fig. 26)
(Fig. 23)
(Fig. 27)
4. When the weights have been inserted, securely close the surface fastener and
push the weight release knob down in the position shown in the photograph. The
knob must be pushed down to this position for the safety lock to catch. (Fig. 27)
(Fig. 28)
5. Insert the weight cartridge in the mounting holder as shown in the photograph.
(Fig. 28)
