GB
17
LOADING THE WEIGHTS (BCJ-1800)
The BCJ-1650 has a weight loading system. Use the following procedure to
mount weights.
* The strength of the Hook & Loop fastener is set on the condition that it be used
underwater. Therefore, you will encounter strong resistance when carrying out
setting it out of the water. Be careful not to let the fastener’s hook come in contact
with any other material since it may damage it.
1. Peel off the Hook & Loop
fastener of the cartridge
closure cover, which are on
the top of left and right
pockets. (Fig. 46)
2. Pull out the weight cartridge
from the mounting holder.
(Fig. 47)
3. Peel off the closure cover of
the weight cartridge. (Fig. 48)
4. Insert as much weight as
needed into the weight
cartridge. (Up to 4kg / 8lbs.
can be inserted into each
cartridge.) (Fig. 49)
5. After inserting the weights,
firmly close the cover.
6. Hold open the cartridge
mounting holder with one
hand and insert the weight
cartridge. (Fig. 50)
7. Push the weight cartridge all the way in, then fasten
the Hook and Loop fastener of the cartridge closure
cover. (Fig. 51)
8. Finally, close the cartridge closure cover completely.
(Fig. 52)
(Fig. 47)
(Fig. 49)
(Fig. 51)
(Fig. 46)
(Fig. 48)
(Fig. 50)
(Fig. 52)
