DSS EX Explosion-Proof Transmitter and Controller Instruction Manual
16
Connectors Labeling
The connectors’ label, affixed to the scanner, shows the location of all connectors available with
requested configuration.
Warning!
Do not connect any equipment other than
Turtle Tough
expansion
modules, cables, or scanners to the RJ45 M-LINK connector. Otherwise
damage will occur to the equipment and the scanner.
Figure 3. Connector Labeling for Fully Loaded DSS EX
Power Connections
Power connections are made to a two-terminal connector labeled POWER on the back of the scanner. The
scanner will operate regardless of DC polarity connection. The + and - symbols are only a suggested wiring
convention.
Figure 4. Power Connections
AC or DC
POWER
Required External Fuse:
5 A max, 250 V Slow Blow
POWER
+ -
