DSS EX Explosion-Proof Transmitter and Controller Instruction Manual
2
Disclaimer
The information contained in this document is subject to change without notice. Turtle
Tough makes no representations or warranties with respect to the contents hereof; and
specifically disclaim any implied warranties of merchantability or fitness for a particular
purpose.
Caution
Read complete instructions prior to installation
and operation of the scanner.
Warning!
Risk of electric shock or personal injury. Hazardous voltages exist
within enclosure. Installation and service should be performed
only by trained service personnel.
Warning!
•
This product is not recommended for life support applications or
applications where malfunctioning could result in personal injury or
property loss. Anyone using this product for such applications does
so at his/her own risk.
Turtle Tough
shall not be held liable for damages
resulting from such improper use.
•
Failure to follow installation guidelines could result in death or
serious injury. Make sure only qualified personnel perform the
installation.
•
Never remove the instrument cover in explosive environments when
the circuit is live.
•
Cover must be fully engaged to meet flameproof/explosion-proof
requirements.
•
Information in this manual supersedes all enclosure, compliance,
and agency approval information included in additional product
manuals included with this product.
Limited Warranty
Turtle Tough warrants this product against defects in material or workmanship for the
specified period under “Specifications” from the date of shipment from the factory. Turtle
Tough’s liability under this limited warranty shall not exceed the purchase value, repair,
or replacement of the defective unit.
Registered Trademarks
Modbus
®
is a Registered Trademark of Schneider Automation Inc. All other trademarks
mentioned in this document are the property of their respective owners.
© 2019 Turtle Tough All rights reserved.
www.
turtletoughsensors
.com
!
