INSTALLATION - OPERATION - CLEANING — FA SERIES
FOLDING ARM AWNING
8
A. Mount the roof brackets to the roof
using a bracket at each outer end of
the roof.
The remaining brackets are mounted
at a max. 1.5 metre distance from
each other and distributed evenly over
the awning roof.
Screw on the nuts loosely so that
the roof can be adjusted when it is in
place.
B. Mount the roof to the square tube and
tighten the screws.
Then move the roof bracket
downwards so that the screw ends up
on the underside of the square tube.
Now lock the roof bracket to the
square tube using the screw.
Adjust the roof at the side and against
the wall, then tighten the screws.
C. Screw the ends to the roof's screw
pockets once the roof has been
mounted.
© Nordic Light 1-2015
5
Terrace awning
Nordic Light
FA20
Installation - Operation - Cleaning
3
Installing the roof
Mount the roof brackets to the roof
using a bracket at each outer end
of the roof.
The remaining brackets are mounted
at a max. 1.5 metre distance from
each other and distributed evenly
over the awning roof.
Screw on the nuts loosely so that
the roof can be adjusted when it is
in place.
a
Mount the roof to the square tube
and tighten the screws.
Then move the roof bracket
downwards so that the screw ends
up on the underside of the square
tube.
Now lock the roof bracket to the
square tube using the screw.
Adjust the roof at the side and
against the wall, then tighten the
screws.
b
Screw the ends to the roof's screw
pockets once the roof has been
mounted.
c
© Nordic Light 1-2015
5
Terrace awning
Nordic Light
FA20
Installation - Operation - Cleaning
3
Installing the roof
Mount the roof brackets to the roof
using a bracket at each outer end
of the roof.
The remaining brackets are mounted
at a max. 1.5 metre distance from
each other and distributed evenly
over the awning roof.
Screw on the nuts loosely so that
the roof can be adjusted when it is
in place.
a
Mount the roof to the square tube
and tighten the screws.
Then move the roof bracket
downwards so that the screw ends
up on the underside of the square
tube.
Now lock the roof bracket to the
square tube using the screw.
Adjust the roof at the side and
against the wall, then tighten the
screws.
b
Screw the ends to the roof's screw
pockets once the roof has been
mounted.
c
