·
Click the
‘Connect Device’
button. If the connection is correct, the menu with
‘Upgrade’
and
‘Programming set’
will be highlighted. The ESC Software Version information also will be displayed..
·
Programming the parameters of the ESC:
-
Select
‘Programming Set’
. (also the Shortcuts button
)
- Click
‘Connect’
button or
‘Reading Data from ESC’
button to read out the current parameters of
controller, and the firmware version is also displayed below.
- Select the parameters you wish to set.
- Click the
‘Update’
button to save the modification.
- Clicking the
‘Back to default’
button will modify the parameters of ESC to factory default.
NOTE
:
Please set the parameters always after current parameters of ESC is displayed in window and
according to the instructing turn, otherwise programming of ESC will be defeated and ESC will still keep the
parameters set in last time.
Data display area
TURNIGY ESC-100A MANUALS
7 page / 14 pages
ESC version number
Data displa y area
Centigrade
Fahrenheit
