06 ·
These warnings and safety notes are particularly important. Please follow the
instructions for maximum safety; otherwise the charger and the battery can be
damaged or at worst it can cause a fire.
Never leave the charger unattended when it is connected to its power supply. If any
malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the
operation manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and
.
Never drop it.
vibration
The allowable input voltage is 12~18V DC
This charger and the battery should be put on a heat-resistant, noninflammable and
nonconductive surface. Never place them on a car seat, carpet or similar. Keep all
the inflammable volatile materials away from operating area.
Make sure you know the specifications of the battery to be charged or discharged to
ensure it meets the requirements of this charger. If the program is set up incorrectly,
the battery and charger may be damaged .It can cause fire or explosion due to
overcharging. This warranty is not valid for any damage or subsequent damage
arising as a result of a misuse or failure to observe the procedures outlined in this
manual.
Standard Battery Parameters
Be very careful to choose the correct voltage for different types of battery otherwise you
may cause damage to the batteries. Incorrect settings could cause the cells to fire or
explode.
3.7V/cell
Nominal
Voltage
Min. Discharge
Voltage
Max Charge
Voltage
Storage
Voltage
Allowable
Fast Charge
3.7V/cell
4.2V/cell
3.8V/cell
≦
1C
≧
3.0V/cell
LiPo
LiIon
3.6V/cell
4.1V/cell
≧
2.5V/cell
≦
1C
3.3V/cell
3.6V/cell
3.3V/cell
≦
4C
≧
2.0V/cell
LiFe
1.2V/cell
1.5V/cell
n/a
1C-2C
≧
0.85V/cell
NiCd
1.2V/cell
1.5V/cell
n/a
1C-2C
≧
1.0V/cell
MiMH
2.0V/cell
2.46V/cell
n/a
≦
0.4C
≧
1.75V/cell
Pb
WARNING AND SAFETY NOTES
Summary of Contents for MEGA 400WX2
Page 10: ...09 PROGRAM FLOW CHART...
