manualshive.com logo in svg

Turnigy MEGA 400WX2, Operating Manual

Share
Download
Turnigy MEGA 400WX2 Operating Manual Download Page 2

TABLE OF CONTENTS

Introduction......................................................................................................................................02

Special  Features..............................................................................................................................04

Warning  and  Safety  Notes..............................................................................................................06

Program  Flow  Chart........................................................................................................................09

Lithium Polymer Balance Charge Program Connection Diagram..................................................10

Initial Parameter Setup (Users Set Up)...........................................................................................12

Lithium  Battery  (LiIon/LiPo/LiFe)  Program....................................................................................14

Charging Lithium Battery in The Charge Mode...............................................................................15

Charging Lithium Battery in The Balance Mode.............................................................................16

Charging Lithium Battery in The Fast Charge Mode........................................................................17

Charging Lithium Battery in The Storage Mode .............................................................................18

Discharging  of  Lithium  Battery........................................................................................................18

Charging NiCd/NiMH Battery in The Charge Mode......................................................................19

Discharge  of  NiCd/NiMH  Battery..................................................................................................20

Charge/Discharge and Discharge/Charge Cycle of NiCd/NiMH Battery......................................20

Charging Pb (lead-acid) Battery in The Charge Mode..................................................................21

Discharging  of  The  Pb  Battery.......................................................................................................21

Storage  Data  Program..................................................................................................................22

Load  Data  Program.......................................................................................................................23

Various  Information  in  The  Program.............................................................................................23

Warning  and  Error  Message........................................................................................................24

Recommended  Accessories........................................................................................................25

Conformity  Declaration.................................................................................................................26

Maximum  Circuit  Power  Chart.......................................................................................................27

Specification..................................................................................................................................28

Commonly  Used  Terms.................................................................................................................29

Warranty and Service.........................................................................................................................29

·

 

01

Summary of Contents for MEGA 400WX2































Reviews:

No comments

Brands by name

Popular brands

Load more brands