10 ·
Important !!! Before connecting a battery it is absolutely essential to check one last time
that you have set the parameters correctly. If the settings are incorrect, the battery may
be damaged, and could even burst into flames or explode. To avoid short-circuits
between the banana plugs, always connect the charge leads to the charger first, and only
then to the battery. Reverse the sequence when disconnecting the pack.
MEGA 400W×2 comes with male 4mm Bullet connectors attached to the power INPUT
cables. These cables are appropriate for attaching directly to most high-quality AC-DC
power supply units, such as TURNIGY 1080W Power supply:Part No.20611(100-120V
AC) or
. Also included are large Terminal Clips with
matching 4mm female bullet connectors, for attaching directly to 12V car batteries. It is
critically important that you use either a fully charged 13.8 car battery or a high quality
AC-DC power supply in the range of 15V to18V DC output, with minimum current rating
of 60A to insure reliable performance.
Part No.20612(200-240V AC)
CONNECTING THE CHARGER
CONNECTING THE BATTERY
4mm Bullet
Connectors
plugging
to TURNIGY power
supply directly
Using terminal
clip attaching to
car battery
Important Notice
To take advantage of MEGA 400W×2’s full power capability,
the power source should be 15V-18V DC, and output power
should be capable of 1000W or higher.
Low quality DC power source may damage your MEGA
400W×2 charger. We recommend you to choose our
PSU60A, 1080W DC power supply.
LITHIUM POLYMER BALANCE CHARGE PROGRAM
CONNECTION DIAGRAM
Summary of Contents for MEGA 400WX2
Page 10: ...09 PROGRAM FLOW CHART...
