Turnigy ACCUCELL-6, User Manual

Page: 21 / 24

-
19
-
The automatic charging trigger voltage is an automatic
charging current closing program. The principle is that
when the battery voltage rises to the highest point and
starts to back down, it closes the charging current
automatically to complete the charge process. If the
trigger voltage is set too high, easy to cause
overcharging. If the trigger voltage setting too low, the
system may terminate the charge process too early.
(NiMH default value is 7 MV; NiCd default value is 12
MV)
You will heard a beep sound when changing charging
mode. Beep sound can be turn on or turn off.
Iput AC voltage is 10-18V, this program used to detect
of battery input voltage. If voltage lower than the set
value, program cut-off to protect input power.
Resume factory standard setting.
NiCd Sensitivity
D.Peak Default
Key Beep ON
Buzzer ON
Input Power Low
Cut-Off 10.0V
Load Factory Set
E n t e r
STATUS
- +
STATUS
- +
STATUS
- +